|
Checkers: Supplies: Checkers
Printout B/W - WP There are two checkers templates. One a black/white (B/W) template made to print out on red paper. The other is a black/red (R/B)template made to print out on white paper. Choose which one you want to use. Print and cut out the checkers game board. Put into a zip bag. Put 8 black and 8 Red beads into the bag. |
Chutes and Ladders: Supplies: Chutes
and Ladders Printout - WP Print and cut out the Chutes and Ladders game board. Print and cut out the Spinner (can be printed on standard paper or 24 lb white). Select three different colored beads. Choose the spots where you want to place the beads (game pieces). Carefully place a SMALL dot of white glue on the first spot and put the bead into the glue spot. Do the same with the other pieces. Use only a TINY amount of glue otherwise the wet glue will warp the paper. After dry, insert the game board into zip bag. Also insert the spinner. |
Katta Villayatu: Supplies: Katta
Villayatu Side 1 Printout - WP The game template is made to be printed front to back, however it can also be printed as separate sheets. Print and cut out the front (game board) and back (game instructions) of the game. Slide into a zip back. Pick two different colors of foam sheets. Using a hole punch, punch 3 dots of one color and 3 of the other color. These are the game pieces. Put the pieces into the bag. |
|
Memory Game: Supplies: Cut out the Title Card and Instructions Card leaving them connected in the middle. Fold them so that they are back to back and slide into the zip bag so that the instructions are facing the back. Cut out all the game pieces. Shuffle the game cards and place in the zip back so they sit in the front. |
Monoplies: Supplies: Monoplies
Printout - WP 1.
Print and cut out the Monopolies game board. (Name changed
because of copyright) 2. Choose two different colored foam sheets.
From each, cut a strip 1/4
inch wide (see photo). From
each strip, cut a piece ½ inch long. You
should now have two small rectangular pieces, each a different
color. 3. On the Monopolies game board you can see the rectangular
marked
spots. Glue one of
the foam pieces to one spot, then glue the other
foam piece to the other spot.
These represent the game cards. 4. Pick out three different colored beads and glue the beads onto the game board. Choose 3 different areas to put the beads to make it look like the pieces are being played around the board. Glue the pieces using hot glue or super glue gel. If you use regular glue, it will tend to wet and warp the board. |
|
Playing Cards: Supplies: Playing
Cards Printout - WP Print Playing Cards document. Cut out cards. Pick 5 cards (mix face and number cards) and place in fan shape (See example). Place a tiny bit of glue on the back of lower left half of the “B” card. Place it on top of the “A” card. Press together. Continue doing this with cards “C” thru “E”. Using hot glue, glue on a pin back to the back of the cards or place in a bag and pin thru the top. |
Tic-Tac-Toe: Supplies: Tic-Tac-Toe
Printout - WP Print and cut out the Tic-Tac-Toe insert. Slide into the zip bag. Choose 4 same colored pony beads. Choose 4 same colored Tri-Beads. Put the beads into bag. |
Yahtzee: Supplies: Yahtzee
Printout PDF File Print and cut out the Yahtzee game card. Fold in half lengthwise and insert into the zip bag. Select 5 dice beads and put in the bag. |
Webmaster: Debdemer@aol.com
Send mail to debdemer@aol.com with questions or comments about this web site.
Copyright © 2002 All rights reserved.
Last modified: 03/25/2009